en_GB.utf8, en_GB.UTru_RU.utf8uk_UA.UTF-8


    Processes and Equipment of Chemical and Petroleum-Refineries Department on FaceBookProcesses and Equipment of Chemical and Petroleum-Refineries Department on Linkedin

    Login Form

    Users On-line

    We have 69 guests online


    Any suggestions on editing and posting new information on the site you can send by e-mail

    Found a bug? Select it and click

    Система Orphus

    Scientific Products

    Research & Development EN 01

    Vortex spray counter-current flow mass-transfer devicesVORTEX SPRAY COUNTER-CURRENT FLOW MASS-TRANSFER DEVICES
    Application: the processes of absorptive dehumidification of natural and associated petroleum gas, reprocessing of steady carbonic gas condensate and oil into diesel fuel and flash gasoline with the help of  rectification using the engine fuel plants; heat and mass-transfer  processes.
    Liquid atomization takes place due to the influence of high-speed gas flow on water flow. So as a result, we get superfine spraying, the drops move on a spiral path to the periphery of mass-transfer chamber being counter-current to gas flow.
    The counter-current vortex gas and liquid (drop) flows were used in the real construction of mass-transfer device for the first time. It allowed achieving several stages of concentration change in one degree of spraying and replacing the column equipment, which contains 6-10 contact elements with one device.

    Gas separators of inertial and filtering typeGAS SEPARATORS OF INERTIAL-FILTERING TYPE
    Application: natural and associated petroleum gas  purifying from liquid (condensate, hydrate inhibitor, water) and mechanical impurities on initial, intermediate, and final stage of separation in dehumidification plants, low-temperature separation,  gas  refinement, complex  refining gas plant, compressor plant of gas-main pipeline, underground storage facility, industrial compressor plant giving an additional pressure.
    The design of combined gas separators are distinguished by high efficiency of gas cleaning from liquid, in wide range the alteration of efficiency and pressure have reduced hydrodynamic resistance. Separators are equipped with effective entrance assembly units, they fulfill the function of preliminary water separation and mechanical impurities entrapping, fine aerosol coagulators, and high performance centrifugal, inertial and filtering separation elements.

    Rotating vibro-granulator is applied in the chemical industry and is intended for dispersion fusion of nitrogen fertilizers on uniform drops in the granulation tower with their following cooling and crystallization into solid granules in the process of a free fall in the up-coming stream of cooling air. Rotating vibro-granulator is intended for production of monodisperse granulated nitrogen (ammoniac saltpeter, carbamide) and complex fertilizers and represents the system of compactly located primary and ancillary equipment, pipelines. Use of the process of monodispersion brings radical improvement into the technology of fertilizers production. Use of uniform (monodisperse) granules in agriculture allows disseminating fertilizers evenly on the fertilized area and due to this – to get an additional rise of a crop to 10 %. Vibro-granulators allow receiving firm monodisperse granules with a smooth glossy surface (monodisperse degree - up to 99 %) what stipulates for the possibility of intensification of granulation process and essentially raises agro-technical value of fertilizers.

    The way of granulation from fusions, solutions and the suspensions is put in a basis of the vortex type granulator with a variable height cross section of the working space functioning, founded on improvement on dynamics of movement a granules stream that provides increase in monodisperse of granules and uniformity granulometric structure of a prepared product. Vortex type granulator allows receiving the granulated products without application granulation towers which are equipped by difficult and expensive system of communications and have considerable overall dimensions. The developed design of vortex type granulator allows not only to receive granules of the set structure, but also to spend classification of granules by the size.
    The basic advantages of the offered device: 1) possibility of reduction of overall dimensions (in particular, heights) working space; 2) time increase of a granule staying in the working space of the vortex type granulator; 3) possibility of traffic control of a granule in working space of the device; 4) creation in the volume of working space of intensive hydrodynamics with high turbulence; 5) universality (possibility of carrying out of granulation and drying processes in volume of one device); 6) simplicity of manufacturing, possibility of fast readjustment and change of constructive and technological parameters according to the set task.

    The compact unit for pneumatic cleaning of corn of agricultural crops and seeds germination was developed. The principle of unit operation is based on the division of seed and corn heap of crops in the pneumatic classifier with the help of contact element in the way, that mass, passing through the unit, is cleaned from heavy and minor dirt, derived from unit separately from refined corn. In addition the aspiration system is used for cleansing from light dirt.

    The usage of modern granulation technology allows designing complex devices for ammonium nitrate production using dilute solutions. Such complex devices have a simplified assembly unit of neutralization, which exclude solution evaporation to the condition of highly concentrated fusion and construction of expensive granulation tower.
    The processing line includes the following equipment as heat exchangers, blowers, containers, compressors, pumps, gas cleaner, conveyor belt, filters.

    Application: nuclear energy, the production of fuel pellets for fuel rods  of nuclear reactors.

    The intensification of mass transfer is caused by the presence of entrance effects as a result of frequent destruction and film refacing and its circulation in depth. The next aspect is repeated gas phase throttling according to the filling height at its expansion in width in gaps among blocks and its contraction in the ducts of the filling, resulting in phase turbulization and low-frequency pulsation modulation. Uniformity of direction control according to the height increases the performance of a contact device. The suggested high-performance fillings have low hydrodynamic resistance, high productivity and efficiency, minimal losses of liquid and gas, significant independent volume, high strength, water and gas self-distibution. The fillings have a high activity factor of a column cross-section and a strong separation ability. The filling usage diminishes the overall dimensions of mass transfer device.

    Classifying crystallizer allow to obtain macrocrystalline mineral salts and fertilizers of homogeneous granulometric composition, the average size of granules is 0,8 – 3,0 mm. Classifying crystallizers differ from others as super saturation is created in one part of the device and we obtain it in the other part, which has the crystal layer in pseudoliqiud state due to the ascending liquid flow. Use ranging from fluidized bed crystallizer is one way to solve problems to improve quality, reduce energy consumption and intensify in the process of obtaining inorganic salts and mineral fertilizers.

    Research & Development EN 02

    We hope for effective cooperation! For more information about our scientific products, please contact us.

    1 Нафтогазові сепаратори. Трифазні сепаратори. Електродегідратори Александр Ляпощенко 2035
    2 Granulation of nuclear (atomic) fuel Александр Ляпощенко 1387
    3 Gas Separators of the Inertial-Filtering Type Александр Ляпощенко 3192